Karcher Puzzi 100 Spray Ex Machine. (Also suitable for Hagerty /
Escort Spray Ex Machines - New Generation)
Get your machine back to work! - Contact 01442-874720
Trouble Shooting:
Basically the Puzzi 100 Spray-Ex machine sprays and vacuums, therefore a breakdown is rare. However, a malfunction
may occur which is not caused by a failure of the pump, vacuum motor or switches. Providing the pump and vacuum
motor "switch-on", there are two simple methods of checking they are working properly.
Vacuum Motor ----- (Suction Turbine
4.610-047.0)
Switch on and try to lift the vacuum cover dome. If impossible, the vacuum motor is functioning correctly. If
it lifts off, it proves the suction is poor and the fault may be:
 |
Cracked suction dome. Replace dome. |
 |
Missing or damaged seals on suction dome. Replace seals. |
 |
Blocked filter. Filter should be cleaned. |
 |
Defunct vacuum motor, usually identified by low speed and arcing which will necessitate replacement. |
Pump ----- (Motor Driven Pump 6.473-376.0)
Without connecting the the hose to the machine, switch on the pump. If a reasonable jet of water is sprayed
out of the spout at the front of the machine, the pump is working correctly. If no water comes through:
 |
Solution tank is empty. Fill tank. |
 |
Nozzle is blocked. Remove and clean nozzle. |
 |
Filter in solution tank may be blocked. Clean or replace. |
 |
Pump is defective. Replace pump. |
Caution: Danger from electrical current. Pull out mains power plug before any work
is carried out on electrical parts.
 |
Should you still experience problems please contact us for further advice or to return the machine for servicing. |
Parts Diagrams:
 |
 |
Click on the above diagrams to enlarge
|
Pricing - Common Spares / Accessories:
| Code |
|
|
| 4.031-069.0 |
Elbow |
19.11 |
| 4.060-052.0 |
Housing Complete |
140.34 |
| 4.063-628.0 |
Cover |
33.90 |
| 4.070-298.0 |
Bucket |
25.91 |
| 4.130-116.0 |
Hand Tool |
54.00 |
| 4.130-124.0 |
Carpet Nozzle |
48.24 |
| 4.130-127.0 |
Floor Tool Complete |
64.80 |
| 4.310-010.0 |
Nut |
7.02 |
| 4.310-011.0 |
Nut |
7.02 |
| 4.321-101.0 |
Handle Assembly |
73.49 |
| 4.324-011.0 |
Calipers |
11.07 |
| 4.409-401.0 |
Nipple |
6.91 |
| 4.443-019.0 |
Hose Stem |
1.83 |
| 4.446-019.0 |
Hose Coupling |
13.10 |
| 4.610-047.0 |
Suction Turbine |
78.56 |
| 5.029-257.0 |
Suction Pipe |
17.39 |
| 5.130-223.0 |
Suction Nozzle |
7.50 |
| 5.310-043.0 |
Nut |
5.83 |
| 5.321-517.0 |
Handle |
8.21 |
| 5.343-014.0 |
Spring Clip |
1.43 |
| 5.363-108.0 |
Seal Ring |
4.28 |
| 5.363-390.0 |
Seal |
6.43 |
| 5.394-461.0 |
Protection Part |
3.48 |
| 5.402-605.0 |
Connection Piece |
3.71 |
| 5.409-038.0 |
Nipple |
16.08 |
| 5.443-437.0 |
Hose Stem |
4.45 |
| 5.734-087.0 |
Fluffing Strainer |
4.45 |
| 5.734-089.0 |
Filter |
2.90 |
| 5.765-079.0 |
Spray Nozzle |
5.32 |
| 5.765-080.0 |
Nozzle |
5.18 |
| 5.777-027.0 |
Suction Nozzle |
9.31 |
| 6.362-113.0 |
Round Cord Ring |
1.43 |
| 6.362-384.0 |
Gasket |
0.86 |
| 6.362-498.0 |
O-Ring |
1.43 |
| 6.362-526.0 |
O-Ring |
1.43 |
| 6.362-797.0 |
Gasket |
1.43 |
| 6.373-081.0 |
Fastening |
1.34 |
| 6.388-381.0 |
Elbow for coupling |
2.59 |
| 6.391-410.0 |
Suction Hose DN32 |
37.70 |
| 6.414-027.0 |
Filter |
6.53 |
| 6.415-340.0 |
Nozzle |
5.21 |
| 6.435-039.0 |
Castor Wheel |
9.32 |
| 6.435-196.0 |
Wheel |
11.64 |
| 6.435-197.0 |
Wheel Cap |
5.04 |
| 6.473-376.0 |
Motor Driven Pump |
48.24 |
| 6.630-214.0 |
Switch |
2.25 |
| 6.682-391.0 |
Circuit Board |
15.97 |
| 7.312-285.0 |
Washer |
0.40 |
All prices exclude VAT and carriage.
 |
Spares are also available for previous Karcher, Escort / Hagerty Spray Ex Machine
models - please contact: |
Phone: +44 (0)1442-874720 Fax: +44 (0)1442-870934
|