|
|
|
 |
|
|
|
|
Extraction Pro S775
Extraction Pro S775 is a professional low foam detergent concentrate, specially formulated for use
in hot water carpet soil extraction machines. It is suitable for use on most types of carpet, subject to proper
pre-testing as directed. Rapidly penetrates and suspends soils for complete extraction and prevention of re-soiling.
Fluorescent green liquid with citrus fragrance. pH8.5
 |
Dilution:
- Portable machines - dilute 100ml per litre of hot water (1:100) in the machine solution tank.
- Truck-mount units - dilute 1 litre in 4 litres of water (1 to 4) to make metering concentrate. Set flow meter
to 2 to 4 GPH (1:100)
|
|
Directions of usage:
- Always pre-test carpet for colour fastness with diluted solution before proceeding
- Truck-mount units - dilute 1 litre in 4 litres of water (1 to 4) to make metering concentrate. Set flow meter
to 2 to 4 GPH (1:100)
|
|
|
|
Crystal Green S777 - Powder
Crystal Green is a highly concentrated powdered detergent for hot water extraction cleaning of heavily
soiled and greasy carpets. Premium non-ionic carpet extraction detergent for spectacular results on tough, oily
and grease soils.
Green powder with herbal lemon fragrance. pH9.5 IRRITANT
|
Dilution:
- Portable extraction machines - mix 15ml per 10lts of hot water in the machine solution tank - mix thoroughly
until fully dissolved
- Truck mount units - mix 1 kilo in 20 litres of water to make metering concentrate. Set flow meter a 2 to 4
GPH
|
|
Directions of usage:
- Always pre-test carpet for colour fastness with ready to use solution before proceeding
- Pre-treat heavily soiled areas with Multi Pro S709 or Trafficlean S710 according to label directions, then
follow up with normal extraction cleaning procedure
|
|
|
|
Double Clean S776
A highly concentrated , fast dissolving compound formulated for optimum performance in hot water extraction
carpet cleaning equipment. Double Clean S776 contains high quality anionic and non-ionic surfactants, alkaline
builders, optical brighteners for cleaning heavily soiled carpets, plus a special corrosion inhibitor to protect
machinery.. Can also be used as a booster in other cleaning solutions.
Blue powder with citrus mint fragrance. pH9.5 IRRITANT
|
Dilution:
- Portable extraction machines mix 15ml to 30ml per 10lts of hot water in machine solution tank.
- Truck-mount units mix 1 kilo in 20 litres of warm water to make metering concentrate. Set flow meter at 2 to
4 GPH.
|
|
Directions of usage:
- Always pre-test carpet for colour fastness with ready to use solution before proceeding.
- Pre-treat heavily soiled areas with Multi Pro S709 or Trafficlean S710 according
to label instructions, then follow up with normal extraction cleaning procedure.
|
|
|
|
Multi Pro S709
Multi Pro S709 is a multi purpose professional traffic lane cleaner, pre-spray and spotter for use
on carpets. Can also be used as a general purpose alkaline cleaner for heavy soiled and greasy soil on most surfaces.
For application to heavily soiled areas before machine cleaning.
Turquoise blue liquid with citrus mint fragrance. pH10.5
|
Dilution:
- Light duty and general applications - dilute 125ml per litre of water (1 to 8)
- Heavy soil and grease - dilute 250ml per litre of water (1 to 4)
|
|
Directions of usage:
- Always pre-test carpet or surface with diluted solution before proceeding
- Wool carpets and those with unstable dyes should be tested and extraction rinsed with Fibre & Fabric Rinse
B109 according to label instructions
- Apply by sprayer to heavily soiled areas and spots, then agitate carpet with pile brush.
- Blot spots with clean white towel or tissue, then clean treated carpet with normal extraction or shampoo process.
Other surfaces can be wiped with towel or mop.
|
|
|
|
Trafficlean S710
A concentrated industrial strength formula for pre-spraying and spot cleaning of heavily soiled areas
of carpet before extraction cleaning. Trafficlean S710 contains a powerful blend of surfactants and water based
solvents for effective soil and grease removal prior to extraction cleaning. Can also be used as a booster to extraction
machine solutions.
Turquoise green liquid with mint fragrance. pH11
|
Dilution:
- General pre-spray - dilute 100ml per litre of water. (1 to 10)
- Heavily soil and grease - dilute 250ml per litre of water (1 to 4)
- As a booster - add 10 to 30ml per litre of mixed solution in the machine tank
|
|
Directions of usage:
- Always pre-test carpet for colour fastness with diluted solution before proceeding
- Apply by sprayer to heavily soiled areas and spots, then agitate with carpet pile brush
- Follow up with normal extraction machine cleaning to all pre-treated areas
- On wool and wool-blend carpets use Fibre & Fabric Rinse B109 as a neutralising rinse solution
in the extraction machine tank.
|
|
| |
|
|
Stain Pro B144
A heavy duty water based solvent and alkaline protein spotter for neutralising acidic or oily stains
such as most food, blood, vomit, water based inks, fresh tea and coffee, milk, cream and wine on carpet and fabrics.
Clear liquid with mint fragrance. pH10.5
|
Dilution:
- Stain Pro B144-01 is ready to use whereas Stain Pro B144-05 - dilute 1:1
|
|
Directions of usage:
- Always pre-test carpet or fabric for colour fastness and texture change before proceeding.
- Scrape or blot up all excess soiling.
- Apply Stain Pro B144-01 and 05 (solution) directly to stain with sprayer and blot with white
towel or tissue.
- Repeat until there is no further improvement.
- Do not rub
- On wool and all fabrics rinse treated area with Fibre & Fabric Rinse B109
|
|
| |
|
|
Solvex A277
A non-volatile water-rinseable solvent and detergent spot remover for all oil-based paint, emulsion
paint, solvent soluble ink and other solvent soluble stains on carpets, fabrics and hard surfaces.
Clear solvent with aromatic odour. HARMFUL
|
Dilution:
- Solvex A277-01 is ready to use.
|
|
Directions of usage:
- Always pre-test carpet, fabric or surface to be treated before proceeding.
- Do not use on solvents sensitive fibres or surfaces (such as some plastics).
- Apply Solvex A277 directly to stain - DO NOT OVER APPLY.
- Scrape any softened residues with a blunt knife or blot spots gently with a white towel or tissue. DO NOT RUB
- Repeat application if required
- For best results rinse extract with water to remove all residues and prevent ring marks.
- Note: Some old ink and paint marks may be permanent.
|
|
| |
|
|
Odour Fresh B124
A concentrated professional high quality deodoriser with bactericides, specially formulated for use
on carpets and fabrics. Odour Fresh B124 can also be used for general applications - laundry and hard surface deodorisation.
Clear liquid with floral fragrance. pH7.5
|
Dilution & Directions of usage::
- Always pre-test carpets and fabrics for colour fastness before proceeding.
- Portable extractors - mix 5 to 10 ml per litre of extraction shampoo or general cleaning solution (1 to 200,
1 to 100)
- Truck-mount units - add 1litre to 20 litres of detergent metering concentrate
- Carpet & fabric direct spray application - dilute 20ml per litre of water or pre-spray solution (1 to 50),
spray directly on to affected areas then follow up with normal extraction cleaning.
- General application - for hard surface and general area deodorisation - dilute 5 to 10 ml per litre of water
and spray or apply by towel or mop to affected areas.
- Do not apply Odour Fresh B124 by fogging unit.
- Laundry additive - add 50 to 100 ml to wash or rinse cycle.
|
|
| |
|
|
Fibre Shampoo B105
A concentrated blend of high foaming crystallising neutral detergents and performance additives with
new micro-encapsulation formula. Specially formulated for use on carpet fibres and wet cleanable fabrics. Also
contains a buffered pH system to help prevent browning and colour bleed. Fibre Shampoo B105 can be used in conjunction
with carpet rotary brush machines, bonnet mops and dry foam equipment as well as brush and sponge shampoo cleaning
of upholstery fabrics. It has excellent cleaning, quick drying and colour stabilising properties.
Clear liquid with lemon and lime fragrance. pH5 IRRITANT
|
Dilution & Directions of usage:
- Vacuum carpet or fabric thoroughly to remove dry soil before shampoo cleaning
- Always pre-test carpet and fabrics for colour fastness and possible texture change before proceeding with application
- Carpet Cleaning - dilute 30 to 50ml per litre of water. Apply foam evenly by rotary brush
machine, sprayer and carpet bonnet pad, or dry foam machine according to machine operating instructions, at approx
10 m² - 20m² per 5 litres of mixed solution. Reset pile with brush or rake. Do not over-wet. Replace
furniture on protective pads.
- Upholstery Cleaning - dilute 40 to 60ml per litre of water (1 to 20). Apply foam only by sponge,
soft brush or dry foam machine. Do not over-wet. For best results vacuum when dry or rinse extract with Fibre &
Fabrics Rinse B109 solution and leave carpet or fabric to dry thoroughly before reuse.
|
|
| |
|
|
FibreRinseB109
A mildly acidic detergent cleaner and rinse agent which can be applied by sprayer or extraction machine
to help prevent most colour bleed and cellulosic browning on susceptible carpets and fabrics. Fibre & Fabric
Rinse B109 is ideal for use on wool carpets, oriental rugs, cotton and natural fibre upholstery fabrics as well
as all types of synthetic fibres. It will condition and soften all types of wet cleanable fibres and fabrics and
will help restore correct pH by neutralising alkaline cleaners and pre-spotters
Approved by the "Woolsafe" Organisation for use on wool and wool-rich carpets.
Orange liquid with new fresh orange peel fragrance. pH4
|
Dilution & Directions for usage:
- Portable extractors - dilute 10 to 20ml per litre of warm water (1-100 to 1-50)
- Spray treatment - dilute 20 to 50ml per litre of warm water (1-50 to 1-20)
- Truck-mount units - mix 1 litre with 4 litres of water to make metering concentrate. Set flow meter to 2 GPH.
- Always pre-test carpet or fabric for colour fastness before proceeding.
- DO NOT USE ON WATER SENSITIVE FABRICS
- Apply through soil extraction machine as a cleaning and rinsing agent after normal cleaning or pre-spraying
procedure.
- Alternatively apply solution by pressure sprayer after normal cleaning procedure.
- Upholstery fabric should be rinse extracted or sprayed with solution and then blotted with clean white towel.
- DO NOT MIX Fibre & Fabric Rinse B109 with other cleaning agents.
|
|
 |
|
|
|
